Operation Instructions

1. Place battery into battery slot. Some of our older models might have battery connectors. The newer models do not have any connectors. Press the top of the battery against the springs and slide the bottom of the battery into the battery slot.
2. Separate the protective films from the massage pads.
3. Apply a few drops of water on both pads with your finger (this makes the massage sensations stronger).
4. Apply the massage pads on your body while they are still wet and plug the massage pad cord into the socket on the control unit.
5. Turn on the dial switch. The indicator light will be turned on.
6. Gradually increase the intensity to an appropriate level. The farther apart the massage pads are, the more intensity is needed to create massage sensation.
7. Recommended application duration is half an hour. Various massage sensations can be felt throughout the application.
8. At the end of application, turn off the switch (until you hear a click) and the indicator light will be turned off.
9. Remove the massage pads from your body, apply a few drops of water on both pads with your finger, and cover them with protective films.
10. If you use Massage Mouse for more than one hour, it will automatically turn itself off. To continue using Massage Mouse, simply turn the switch off and turn it back on again.

Maintenance and Care:

• Always remember to apply a few drops of water on the sticky surface of both pads before and after use.
• To maintain the cleanliness of the massage pads, always apply a few drops of water and cover them with protective films after use.
• Turn off the instrument when not in use.
• Depending on usage, each pair of massage pads usually last for more than 2 months.
• When the massage pads completely lose their adhesiveness, extra massage pads can be ordered from Massage Pads page.